Powder Coating Services - How to Protect Your Conveyor System From Dust and Fire

Power coating services are offered by many companies today. They all have one thing in common: they need to make sure that they can get the job done by using a high quality powder coat system for any part size they need to cover. If they don't, then their customer may not be satisfied with the end result and could possibly cancel his or her order. Here's how every part size limit has to be met in today's powder coating applications:

Powder coat systems are typically used in large industrial applications, where the powder coating company must meet part weight limitations. For instance, the powder coating services for bay area power coating services have to use a high pressure hot air dryer. The dryer has to have the ability to keep working for long periods of time without overheating or burning out. That's because the system that's being used is typically spraying very hot particles onto a surface that's several miles away from the sprayer itself.

Typically, that the surface has to be thick enough to withstand the extreme temperatures the hot particles will experience. It also needs to be made of a material that will be damaged by the heat emitted by the dryer. In addition to that, the coating material must be a solid type or else it will not seal properly. That's why it's so important for the bays to be amine coated - or at least aaamine-coated with an approved brothers powder coating material. 

There are two types of material that can be used as a powder coatings application material. The first is steel powder - which is a very good type of coating that can handle anything that's thrown at it. It has a good part size limit because it can't be applied too thin and it also can't be applied too thick. But when it comes to actually building an amine coating, there's nothing like steel powder. It's a very effective and versatile powder coat that has virtually no part size limit.

Another type of material that is sometimes used as a powder coating application material is iron phosphate. As the name would suggest, iron phosphate is actually an extremely dense and quite hard compound of iron and other alloys. Because of its high density, iron phosphate can actually be applied at high temperatures and it has a very good part size limit. Unfortunately, it also has a really low fire retardant level and it can quickly burn under the right conditions.

If you want your next conveying system or paint spraying booth to have as much protection against dust and fire as possible, then you need to get a powder coat that is made of iron phosphate. The good news is that most powder coatings made today are made using this material. But that doesn't mean that yours has to be. You could instead choose to use a closed loop powder coating system that makes use of a simple ring of closed looped metal powders. With this kind of powder coating services, you can save on the cost of heating rings up in the oven and you can still get the same high quality protection that you would from a chemical accelerated paint sprayer or an airbrush machine.

For you to get more enlightened about this subject, see this post: https://en.wikipedia.org/wiki/Powder.